Green High Temperature Masking Tape / Green Polyester Tape
Description: The industry standard plater's tape, all products have a 1 mil polyester film backing with a silicone pressure sensitive adhesive system engineered for no/low residue.
Uses: Designed to perform in all phases of masking operations for printed circuit board production. Protects circuits from splashes and chemical fumes.
Features/Benefits: Highly conformable for no-leak seals. Controlled unwind force enhances manual or machine application. The tough polyester film substrate allows for easy removal without danger of breakage or bath contamination.
1.PET backing provides flexibility and conformability, solvent resistance, chemical resistance.
2.Peeled without leaving residue on surfaces.
3.Precision cut for tear resistance and clean, crisp paint lines.
PET High temperature masking Tapes FDS-2565SIG,FDS-5080SIG,FDS-3565SIG,FDS-2590SIG are designed For Powder coating masking,High temperature painting,Galvanization.
1.Backing: green PET film
2.Adhesive: silicone adhesive
3.The high temperature powder coating tape is designed to perform in difficult masking operation such as various phases of production or masking of surfaces during application of durable powder coatings.
4.Diecutted in disc for masking, powder coating
APPLICATION
1. Anodizing
2. Electronic Assembly
3. General Purpose Masking
4. Masking Electronic Components
5. Powder Coating
6. Plating
7. Photo Splicing
8. Shipping and Packaging
9. High temperature masking
CONSTRUCTION
PET Film | ||
Silicone Adhesive |
Green Polyester Tape Data Sheet
| Property Name | PET Silicone Adhesive Tape |
| Thickness mil basic | 0.036mm-0.075mm |
| Thickness (mm) total | 0.050mm, 0.055mm, 0.06mm 0.100mm etc |
| Width mm | 2-1070mm |
| Length (m) | 33/66m etc |
| Adhesive Strength (N/25mm) | ≥5-10 |
| Elongation Rate | 60% |
| Elongation at break (%) | 60 |
| Tensile Strength (N/25mm) | 135 |
| Maximum temperature | 220°C 10 min, no adhesive overflowed |
| Pollution resistance | 220°C, 2 hours, no adhesive remained on the object |
| Adhesive ability (mm) | 1 hour, displacement ≤3mm |
| Colour | Green |
SHELF LIFE Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product shelf life is 1 years from date of manufacture when stored at room temperature conditions (72°F [22°C] and 50%-75% RH) in the products original packaging.
AVAILABLE SIZES
Width: Maximum width 1070mm(Can be Customized)
Length: 33m/66m (Can be customized).
Custom Sizes: If you need customized sizes or die cut parts please feel free to contact FDS sales representative.
APPLICATION GUIDELINES
1.) Substrate surfaces should be clean and dry prior to tape application. Isopropyl alcohol (isopropanol) applied with a lint free wipe or swab should be adequate for removing surface contamination such as dust or finger prints. Do not use "denatured alcohol" or glass cleaners which often contain oily components. Allow the surface to dry for several minutes before applying the tape. More aggressive solvents (such as acetone, methyl ethyl ketene (MEK) or toluene) may be required to remove heavier contamination (grease, machine oils, solder flux, etc.) but should be followed by a final isopropanol wipe as described above.
Note: Be sure to read and follow the manufacturers' precautions and directions when using primers and solvents.
2.) Apply the tape to one substrate at a modest angle with the use of a squeegee, rubber roller or finger pressure to help reduce the potential for air entrapment under the tape during its application. The liner can be removed after positioning the tape onto the first substrate.
3.) Assemble the part by applying compression to the substrates to ensure a good wetting of the substrate surfaces with the tape. Proper application of pressure (amount of pressure, time applied, temperature applied) will depend upon design of the parts. Rigid substrates are more difficult to bond without air entrapment as most rigid parts are not flat. Use of a thicker tape may result in increased wetting of rigid substrates. Flexible substrates can be bonded to rigid or flexible parts with much less concern about air entrapment because one of the flexible substrates can conform to the other substrates.
Related Products:
polyimde tape brown polyimide tape black polyester masking tape
Perfect for using in electronic products, soldering and circuit boards, wave soldering, etching, fiber optics cable, insulating circuit boards, manufacturing semiconductor,
high temp powder coating, automotive sensor and manifolds, electric motor, painting, packing fixing, printing PCB board etc.
PET Tape is perfect for the insulation, binding and fixation of Lipo batteries as well as a print surface material for heated 3D printer beds. Sometimes known as Mylar tape (a proprietary name of Dupont) this tape is made of PET film and acrylic adhesive tape, the material is solvent resistant and remains strong in high temperatures.
Use PET tape to ensure no residual glue is left on your battery packs.
Company Information
FDS Mainly develop and produce high-temperature resistant adhesive tapes of various materials such as PET polyester tapes, polyimide taps (the commonly used high-temperature adhesive tapes are brown and dumb black Polyimide tapes), battery termination tapes, and protective film products etc. The FDS technology Co., Ltd has its own coating technology, production line and testing as one of the management and control capabilities.
Our Service
1.Your inquiry related to our product & price will be replied within 24hours.
2.Well-trained & experienced staff are to answer all your inquiries in English of course.
3.Working time: 8:00am - 11:30pm, Monday to Saturday (UTC+8).
4.Your business relationship with us will be confidential to any third party.
5.Good after-sale service offered, please get back if you got question.
FQA
1.Payment: 50% T/T DEPOSIT PAYMENT IN ADVANCE, BALANCE AGAINST COPY OF B/L, WESTERN UNION, L/C.
2.Production Lead Time: 10 - 20 DAYS AFTER DEPOSIT PAYMENT.
3.Shipping Methods: OCEAN FREIGHT.
4.FOB Shipping port: SHENZHEN, MAINLAND CHINA.
5.If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.
Packing & Delivery
Packaging Details
6 pcs/Shrink package 36/72 rolls per carton
Delivery Time
3-7 days after the 30% advance payment.
More interests or certificates needed Or wanna make vedio meeting to see our factory just contact me. 24h online if you need me!